Showing 17–32 of 67 results
PLASTIC CHANNEL 60Χ60 41060060.10
The proposed areas of application are on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
PLASTIC CHANNEL 60Χ60 41060060.10
The proposed areas of application are on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
PLASTIC CHANNEL 80Χ40 41080040.10
The proposed areas of application are on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
PLASTIC CHANNEL 80Χ40 41080040.10
The proposed areas of application are on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
PLASTIC CHANNEL 80Χ60 41080060.10
The proposed areas of application are in plants on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
PLASTIC CHANNEL 80Χ60 41080060.10
The proposed areas of application are in plants on wood and on the coating. At the same time, they are ideal for installations on plasterboard.
The small dimensions are also available with double sided adhesive tape with high adhesive capacity, resistance to aging and exposure to UV radiation. The caps of the distribution channels are covered with a special protective film.
SI-BI PIPE FLEXODIN M.T 23 45000723
Minimum compression force: 750 N.
Temperature of use: From -25 ° C to + 60 ° C.
Instant temperature: + 70 ° C is allowed.
Flame resistance, self-extinguishing, corrosion resistance.
FLEXODIN® is used where the durability of the Easyflex® tube is not sufficient due to some strict requirements. It is suitable for use inside and under the plaster and mainly in cast cement.
The pipe is produced in gray Ral 7042 color from specially stabilized PVC-U, self-extinguishing, with resistance to flame and corrosion. It is a reinforced pipe, very flexible, without alteration of the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
SI-BI PIPE FLEXODIN M.T 23 45000723
Minimum compression force: 750 N.
Temperature of use: From -25 ° C to + 60 ° C.
Instant temperature: + 70 ° C is allowed.
Flame resistance, self-extinguishing, corrosion resistance.
FLEXODIN® is used where the durability of the Easyflex® tube is not sufficient due to some strict requirements. It is suitable for use inside and under the plaster and mainly in cast cement.
The pipe is produced in gray Ral 7042 color from specially stabilized PVC-U, self-extinguishing, with resistance to flame and corrosion. It is a reinforced pipe, very flexible, without alteration of the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
SI-BI PIPE FLEXODIN M.T 29 45000729
Minimum compression force: 750 N.
Temperature of use: From -25 ° C to + 60 ° C.
Instant temperature: + 70 ° C is allowed.
Flame resistance, self-extinguishing, corrosion resistance.
FLEXODIN® is used where the durability of the Easyflex® tube is not sufficient due to some strict requirements. It is suitable for use inside and under the plaster and mainly in cast cement.
The pipe is produced in gray Ral 7042 color from specially stabilized PVC-U, self-extinguishing, with resistance to flame and corrosion. It is a reinforced pipe, very flexible, without alteration of the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
SI-BI PIPE FLEXODIN M.T 29 45000729
Minimum compression force: 750 N.
Temperature of use: From -25 ° C to + 60 ° C.
Instant temperature: + 70 ° C is allowed.
Flame resistance, self-extinguishing, corrosion resistance.
FLEXODIN® is used where the durability of the Easyflex® tube is not sufficient due to some strict requirements. It is suitable for use inside and under the plaster and mainly in cast cement.
The pipe is produced in gray Ral 7042 color from specially stabilized PVC-U, self-extinguishing, with resistance to flame and corrosion. It is a reinforced pipe, very flexible, without alteration of the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
SI-BI PIPE PROFLEX 11 45010611.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 11 45010611.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 13,5 45010613.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 13,5 45010613.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 16 45010616.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 16 45010616.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 23 45010623.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 23 45010623.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 29 45010629.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SI-BI PIPE PROFLEX 29 45010629.30
• Minimum compression force: 750 N.
• Temperature of use: From -25 ° C to + 60 ° C.
• Instant temperature: + 70 ° C is allowed.
• Flame resistance, self-extinguishing, corrosion resistance.
PROFLEX® is used in all electrical installations.
It is ideal for use in all types of cement and especially in cast cement. In cases of difficult diodes it can be used in combination with rigid reinforced pipes.
The tube is produced in gray RAL 9002 the outer cover and gray RAL 7042 the inner tube.
It consists of specially stabilized PVC-U and PVC-S, self-extinguishing, with resistance to flame and corrosion. It is very flexible without altering the vertical section.
The classification of the pipe according to standard ELOT EN 61386.21 is 3341, which corresponds to a compression force of 750 N and a temperature of use from -25 ° C to + 60 ° C (instantaneous exposure to a temperature of + 70 ° C is allowed).
Also available with internal wire, PROFLEX WIRE® cable crossing.
SPIR-FLEX PIPE Φ10 GRAY 61010010
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ10 GRAY 61010010
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ12 GRAY 61010012
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ12 GRAY 61010012
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ14 GRAY 61010014
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ14 GRAY 61010014
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ16 GRAY 61010016
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ16 GRAY 61010016
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ16 WHITE 61010016.10
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ16 WHITE 61010016.10
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ18 GRAY 61010018
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
SPIR-FLEX PIPE Φ18 GRAY 61010018
Minimum compression force: 320 N.
Temperature of use: From -20 ° C to + 60 ° C.
The SPIRFLEX® hose is made of specially stabilized soft PVC-S and is reinforced with an external helical coil of hard PVC-U.
The properties of the pipe according to standards ELOT EN 61386 are of light type, with classification code 2341, for resistance to compression force 320 N in installations with ambient temperatures from -20 ° C up to + 60 ° C.
It is ideal for outdoor installations in residential and industrial areas, as it works with IP 65 waterproof boxes and mounting accessories.
Also suitable for air-conditioning drains.
Copyright © 2024 - Astron
